top of page

Description

 

The Classic Series features Furman’s revolutionary Series Multi-Stage Protection (SMP), Linear Filtering Technology (LiFT), and Extreme Voltage Shutdown (EVS). Together, these technologies comprise what is, without question, one of the world’s most advanced and comprehensive transient voltage surge supressors.

 

Applications

 

INSTRUMENT RIGS

You’ve got a rack for your effects, preamps, tuner…You’re going to plug that into the wall? One big spike and your rig is up in smoke. Furman’s advanced Series Multi-Stage Protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman’s advanced Linear Filtering Technology, you’ll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.

 

RECORDING

Can’t track down where that noise is coming from? Your mix sounding flat? With Furman’s advanced Linear Filtering Technology you’ll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman’s advanced advanced Series Multi-Stage Protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and eleven total outlets, it’s enough to power your whole home studio.

 

DJ EQUIPMENT

Bars, clubs and other event venues have some of the worst power out there – from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman’s advanced Series Multi-Stage Protection and LiFT keeps the bad stuff out and the dual pull-out front panel lights let you discreetly see your board and gear without distracting from the show on the dance floor.

 

PRO AUDIO

When you’re out there gigging, you never know what kind of power you’re going to get. The wear and tear on mobile rigs eventually takes it toll – that’s why it’s smart to plug into Furman’s advanced Linear Filtering Technology. It keeps your equipment safe and sounding clean. Whether you’re setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

 

Product Link: https://furmanpower.com/product/16a-power-conditioner-with-lights-volt-ammeter-220v-240v-export

 

 

Furman 16A Power Conditioner (PL-PRO DM C E)

$1,128.00Price
Estimated waiting time: 1 to 2 months
  • AC Voltage Input Range 180-270VAC, 50/60Hz
    Maximum AC Current Rating 16 amps (Thermal breaker)
    AC Cord 1.5mm2x3, 2.5m Long, black, IEC C19 Female to Schuko CEE 7/7 Male Plug
    Rear Panel Outlets 1 IEC C13 pair (Unswitched), 3 IEC C13 pairs (Sequenced, each pair is controlled by separate relay)
    Front Panel 1 IEC C13 (Unswitched)
    Surge/Under-Overvoltage Protection AC Surge Protection Series Multi-Stage Protection SMP
    Spike Protection Mode Line to neutral, zero ground leakage
    Spike Clamping Voltage 375V peak @ 6,000 volts/3,000 amps
    Response Time 1 nanosecond
    Maximum Surge Current 6,500 Amps
    AC Undervoltage Protection EVS, 175VAC+/-3VAC
    AC Overvoltage Protection EVS, 275VAC+/-5VAC
    AC Overvoltage Reset Modes Manual and Auto-reset (configurable)
    AC Filtering LiFT
    Noise Attenuation Linear, 10dB @10KHz, 40dB@100KHz, 50dB@500KHz
    Operating Temperature Range 5C (40F) to 40C (105F) degrees
    Humidity Range <90% rH (Relative Humidity)
    Keyswitch Front panel, 3-position keyswitch (On, Off, Remote)
    Keys Included, 1 pair
    Pushbutton Switch Front panel, hidden by security cover
    Circuit Breaker Front panel, pushbutton, 20A Thermal Breaker
    Front panel diagnostic indicators Primary link, Secondary link, Ethernet, Remote off, Delay 1, Delay 2, Delay 3, Power, Protection OK, Extreme Voltage
    Front Panel DIP Switches Front panel. Hidden by security cover, 1 Minute Delay, 2 Minute Delay, 4 Minute Delay, Force Off NO/NC, 12V Mode On/Off BND Mode On, Momentary/Maintained, Primary/Secondary, EVS Reset Auto/Manual
    Potentiometer Front panel, hidden by security cover, fine tune delay adjust
    Control/Status/Triggering (Rear Panel) Remote Terminal +5-30VDC In, 12VDC (12mA) Out
    SmartSequencing Phoenix 4-Pin Connector, Screw Terminals, Primary & Secondary Links (Current Loop – 1000’ nominal)
    Remote Terminal Phoenix 4-Pin Connector With Screw Terminals; +12V, STAT, REM, GND (Class 2 Wiring)
    Force Off/Delay 3 Terminal Phoenix 5-Pin Connector With Screw Terminals, FORCE OFF, DELAY 3 (Class 2 Wiring)
    RS-232 Compatible Yes, DB-9 Connector
    Voltmeter Available with RS-232, ± 2VAC accuracy
    Ammeter Available with RS-232, ±1A accuracy
    Power Consumption (No Load) 10 Watts
    Safety Agency NRTL-C, RoHS Compliant

  • Prices are inclusive of Singapore GST.

    Contact us directly for international purchases via email at eugene@theaudiotonic.com

Related Products

bottom of page